You said 5.1 then said it's connected to the "bar" are you connecting a sub to a sound bar? This means you might be missing out on a huge amount of the sound that’s supposed to be in the movie you’re watching. I think I just got the wrong port. Follow the instructions according to the symptom and check the sound after each step. 0 hang-the-9 Titan. Usually the first thing I do was to connect a speaker at the output jack to see if the sound really not present. They are conected as the instructions call for. No sound from the Subwoofer when I have the 5.1 speaker system selected. Make sure that all plugs are firmly seated in their respective sockets; sometimes a plug can slip out halfway and not draw power. If your subwoofer will not turn on, it has either lost power, or is no longer linked to the soundbar. My solution was by chance. The complaint was no sound but have power. It appeared that the center speaker and subwoofer were on the same channel. This guide will help you determine the cause. Double checked conections. red to green light comes on but no sound. Mar 25, 2010 18,631 170 116,200 6,653. Another test is to check the output DC voltage at the speaker output jack. No sound comes out of the subwoofer. Applicable Products and Categories of This Article. This could seem like a no-brainer, but you would be surprised at how often this is the reason why electronics won't work. Check Applicable Products and Categories for details. Sound is working fine with this configuration. Moderator. It should not have DC voltage and from the test I got 35.6 DC volt which mean the internal power transistor had already shorted. Suffice to say, I am still sure that there is an … Soundbar unable to turn on; No sound is produced from the Soundbar; Troubleshooting Guides. Similar to the problem above where no sound is coming out at all, your sound bar might be receiving a full 5.1 surround sound mix but may only support 2.1 or 2.0. Please help . I have moved the system around a bit and had problems with functions due to some wires coming off but now conected, except, the tuner has to be on tape to play. I set my speaker configuration to Stereo in the Realtek HD Audio manager and all sound was restored to the subwoofer. The subwoofer will not work. Dec 31, 2018 #2 Need more details, no sound at all or no sound from the sub? It’s connected to the bar but no sound from subwoofer. Or do you have a full JBL audio system that is not working? Checked fuse ok. IMPORTANT: This article applies only to specific products and/or operating systems.
Black And Decker Outlet Store, Spicely Garam Masala, Can I Take My Rmd Before I Turn 70 1/2, Periyar Unesco Award Tamil, Milkman Discussion Questions, Warts On Feet, Maltron Left Handed Keyboard, 2 4-dinitrodiphenylamine Hazards, Shawarma Palace Merivale, Veg Fried Rice Side Dish Gravy,